Purpose: This machine is used for setting up those irregular specimens.Then the specimens can fix in with the request of the surface.It also can protect the edge keep out of the abrasion .The specimen size is limited by the Semi-automatic or Automatic Grinder/Polisher.With this view ,this machine is one of the necessary equipments in the metallographic lab. The machine is automatic mounting press for metallographic specimen.It is fit of all thermosetting materials because of the cooling system .It can finish automatically with the heating temperature,the holding time,acting force.The operator can change 4 specification patterns according to the difficult specimens.It can make 2 specimens at one time. Specification: 1、Specifications of mould: ¢25mm, ¢30mm, ¢40mm, ¢50mm 2、Power supply: 220V, 50Hz 3、Max. Power: 1800W 4、Setting range of system pressure intensity: 0-2Mpa corresponding specimen preparing pressure intensity: 0-72Mpa 5、Specimen preparing temperature setting range: 0-300℃ 6、Heat preserving time setting range: 0-99m99s 7、Dimensions: 615 x 510 x 500 mm 8、Weight:110KG 9、Cooling system: water-cooling |